Etude de la convection naturelle et de la radiation autour de la machine Synchro-réluctante
Jeunes Chercheurs en Génie Electrique (JCGE 2015), Cherbourg, France, 10&11 Juin, 2015

Intérêts et limtes des logiciels de simulatino numérique CFD dans l'étude du transfert thermique dans un système rotor-stator : Application à un alterno-démarreur intégré
Jeunes Chercheurs en Génie Electrique (JCGE 2015), Cherbourg, France, 10&11 Juin, 2015

LiFePO4/graphite Battery Modelling for an Aeronautical Application
2015 IEEE 24th International Symposium on Industrial Electronics (ISIE'15), Buzios, Rio de Janeiro, Brazil, 03-05 June, 2015

Development and Characterization of a Dynamic Smart Structure Providing Multi-axis Force Sensing for Robotic Applications
IEEE International Conference on Robotics and Automation (ICRA'15), Seatle, Washington, USA, May 26-30, 2015

A new methodology for identifying external convection coefficients in electric machines
IEMDC 2015, Coeur d'Alène, Idaho, USA, May 10-13, 2015

Modélisation d’une batterie lithium ion pour des applications aéronautiques de puissance
Journées Electrotechniques du Club EEA, Toulouse, France 24 et 25 mars 2015

Modélisation et commande des systèmes mécatroniques. L'exemple d'une maquette de lévitation magnétique
Enseignement des Technologies et des Sciences de l'Information et des Systèmes (CETSIS'2014), Besançon, France, 27-29 Octobre, 2014

Impact of the Flied Weakening on the Iron Losses in the Stator of an Internal Permanent Magnet Synchronous Machine
ECCE 2014, Pittsburgh, PA, USA, September 14-18, 2014

Noise Radiated by a Permanent Magnet Synchronous Motor : Simulation Methodology and Influence of Motor Defects
ICEM 2014, Berlin, Germany, 02-05 September 2014

Innovative Permanent-Magnet Starter Motors for Automotive Micro-Hybrid Applications
ICEM 2014, Berlin, Germany, 02-05 September 2014

Thermal Model of Stator Slot for Small Synchronous Reluctance Machine
ICEM 2014, Berlin, Germany, 02-05 September 2014

Influence of temperature on the vibro-acoustic behavior of claw-pole alternators
ICEM 2014, Berlin, Germany, 02-05 September 2014

Multi-axis force sensing with pre-stressed resonant composite plates : An alternative to strain gauge force sensor
IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM'2014), Besançon, France, 08-11 July, 2014

Détermination expérimentale des coefficients d'échange thermique en mode de convection naturelle : Application à une machine électrique intégrée dans son environnement
SGE 2014, Cachan, France, 08-10 Juillet, 2014

Dimensionnement optimal de machine à aimants permanents internes sur cycle de fonctionnement pour des applications de véhicules hybrides
SGE 2014, Cachan, France, 08-10 Juillet, 2014

Modélisation macroscopique des couplages magnéto-élastiques d’un matériau ferromagnétique doux
SGE 2014, Cachan, France, 08-10 Juillet, 2014

Modélisation Thermique de l’Alternateur à Griffes : Etude de la Convection Naturelle dans l’Entrefer
SGE 2014, Cachan, France, 08-10 Juillet, 2014

Modélisation électrique et thermique des condensateurs électrolytiques en vue de l’analyse de leur vieillissement dans un contexte de traction électrique
SGE 2014, Cachan, France, 08-10 Juillet, 2014

Résultats expérimentaux sur la durée de vie des batteries au plomb associées aux supercondensateurs
SGE 2014, Cachan, France, 08-10 Juillet, 2014

Influence de la température sur le comportement vibro-acoustique des alternateurs à griffes
JCGE 2014-SEEDS, Saint-Louis, France, 04-05 Juin, 2014

A macroscopic local magnetostriction model taking into account the anisotropy and stress effect
CEFC 2014, The Sixteenth Biennal IEEE Conference on Electromagnetic Field Computation, Annecy, France, May 25-28, 2014

Advanced Electric Model of Aluminium Electrolytic Capacitor with Diffusive Element
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

Power capability study of a Cascaded Doubly Fed Induction Machine
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

Thermal modeling of an Asymetrical Totally Enclosed Permanent Magnet Integrated Starter Generator
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

Fast Iron Losses Model Taking Into Account the Control Laws for the Optimal Sizing of IPMSM
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

New approach for maximum power tracking of a variable speed WT at constant power generation, under normal grid conditions
MELECON 2014, 17th IEEE Mediterranean Electrotechnical Conference, Beirut, Lebanon, April 13-16, 2014

Design and Magnetic Noise Reduction of the Surface Permanent Magnet Synchronous Machine
EVER Monaco 2014, Internationla Conference on Ecological Vehicles & Renewable Energie, Monte-Carlo, March 27, 2014

Thermal Modeling and Experimental Validation of a Large Prismatic Li-ion Battery
IECON 2013, 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, 10-14 November 2013

Simcal Project: Calendar Aging Results Obtained On a Panel of 6 Commercial Li-Ion Cells
224th ECS Meeting in San Francisco, California, October 27-November 1 2013

On-Line Adaptive Tuning of a Lithium-Ion Battery Cell State of Charge Observer
ECCE 2013, IEEE Energy Conversion Congress & Exposition, Denver, CO, USA, September 15-19, 2013

Determination of rotor-stator heat exchange coeffcients in the case of totally enclosed machines : Application to an integrated starter-generator
ECCE 2013, IEEE Energy Conversion Congress & Exposition, Denver, CO, USA, September 15-19, 2013

Normal Permeability of Grain Non-Oriented, Grain Oriented and Amorphous Electrical Steel Sheets
ISEF 2013, XVI International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Ohrid, Macedonia, September 12-14, 2013

Study of Electromagnetic Forces Computation Methods for Machine Vibration Estimation
ISEF 2013, XVI International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Ohrid, Macedonia, September 12-14, 2013

Interaction Between Numerical Analysis and Analytical Approach in Order to Reduce the Magnetic Noise Produced by a Permanent Magnet Motor
ISEF 2013, XVI International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Ohrid, Macedonia, September 12-14, 2013

Simple Lumped Parameter Thermal Model with Practical Experimental Fitting Method for Synchronous Reluctance Machine
EPE13'ECCE Europe, 15th European Conference on Power Electronics, Lille, France, 3-5 September 2013

Lithium-Iion state of charge observer with open circuit voltage hysteresis model
EPE13'ECCE Europe, 15th European Conference on Power Electronics, Lille, France, 3-5 September 2013

A Methodology for Studying Aluminium Electrolytic Capacitors Wear-out in Automotive Cases
EPE13'ECCE Europe, 15th European Conference on Power Electronics, Lille, France, 3-5 September 2013

Harmonic pressure optimization on numerical electric motor model
COMPUMAG 2013, Budapest, Hungary, 30June-4 July 2013

Détermination rapide d'un modèle thermique de machine à synchro réluctance
JCGE 2013, Saint-Nazaire, France, 5&6 juin 2013

Amélioration du comportement vibratoire d'une machine électrique en optimisant la pression magnétique sur un modèle numérique
JCGE 2013, Saint-Nazaire, France, 5&6 juin 2013

Modélisation thermique d'une batterie Li-ion prismatique de grande capacité et validation expérimentale
JCGE 2013, Saint-Nazaire, France, 5&6 juin 2013

Une méthodologie pour l'étude de l'usure des condensateurs aluminium électrolytiques dans un véhicules urbain
JCGE 2013, Saint-Nazaire, France, 5&6 juin 2013

Optimization methods coupled to finite element analysis to design electric machines for automotive applications
Modelling Novel EM Devices seminar, UK Magnetics Society, 22nd May 2013

In vitro characterization of the technique of portal vein embolization by injection of a surgical glue
65th Annual Meeting of the APS Division of Fluid Dynamics, Volume 57, Number 17, San Diego, California, November 18-20, 2012.

Toward an optimal Heisenberg’s closed-loop gate drive for Power MOSFETs
38th Annual Conference on IEEE Industrial Electronics Society (IECON2012), Montréal, Canada, October 25-28, 2012.

Active Reduction of Electrical Machines Magnetic Noise by the Control of Low Frequency Current Harmonics.
38th Annual Conference on IEEE Industrial Electronics Society (IECON2012), Montréal, Canada, October 25-28, 2012.

Rotor and Stator Shape Optimization of a Synchronous Machine to Reduce Iron Losses and Acoustic Noise.
The 8th IEEE Véhicle Power and Propulsion Conference (VPPC2012), Seoul, Korea, October 9-12, 2012.

Application of Output Space Mapping Method for Fast Optimization Using Multi-Physical Modeling
IEEE Energy Conversion Congress & Exposition (ECCE2012), Raleigh, USA, September 15-20, 2012.

Analytical Model taking into account the Cross Saturation for the Optimal Sizing of IPMSM
XXth International Conference on Electrical Machines (ICEM2012), Marseille, France, September 2-5, 2012.

Thermal Modelling of a Claw-Pole Car Alternator : Steady-State Computation and Identification of free Convection coefficients.
XXth International Conference on Electrical Machines (ICEM2012), Marseille, France, September 2-5, 2012.

Numerical Simulations of Rotor Dynamic Eccentricity Effects on Synchronous Machine Vibrations for Full Run Up.
XXth International Conference on Electrical Machines (ICEM2012), Marseille, France, September 2-5, 2012.

A Simple Experimental Prediction Model of Photovoltaic Power for DC Microgrid
21st IEEE International Symposium on Industrial Electronics (ISIE2012), Hangzhou, China, May 28-31, 2012.

Modèle analytique prenant en compte la saturation croisée pour le dimensionnemnt optimal des machines à aimants internes
EF 2011, Belfort (France), 14-15 décembre 2011

Stéphane Butterbach, Bogdan Vulturescu, Christophe Forgez et Gérard Coquery

Etude de l'influence de kl'association de batterie au plomb et de supercondensateurs suir l'autonomie d'une benne à ordures ménagères
EF 2011, Belfort(France), 14-15 décembre 2011

Analyse Thermique 3D d'un Alternateur à Griffes : Modélisation, Simulation et Identification Expérimentale de la convection libre du modèle en régime thermique établi.
EF 2011, Belfort(France), 14-15 décembre 2011

Etude vibro-acoustique de machines synchrones à aimants à bobinage dentaire
EF 2011, Belfort(France), 14-15 décembre 2011

Wavelet-based Non-stationary Acoustical Holography
Surveillance 6, Compiègne, France, october 2011

Fast optimization of an IPMSM with Space Mapping Technique
ECCE 2011, Phoenix (Arizona - USA), 17-22 septembre 2011
Digital Object Identifier : 10.1109/ECCE.2011.6064268

PWM Strategy dedicated to the reduction of DC bus capacitor stress in embedded three phase inverter
IEEE VPPC 2011, Chicago (Illinois, USA), 6-9 septembre 2011
Digital Object Identifier : 10.1109/VPPC.2011.6043068

Lead-acid battery model for hybrid energy storage
IEEE VPPC 2011, Chicago (Illinois, USA), 6-9 septembre 2011
Digital Object Identifier : 10.1109/VPPC.2011.6043091

Study of graphite/NCA Li-ion Cell Degradation During Accelerated Aging Tests - Data Analysis of the SimStock Project.
IEEE VPPC 2011, Chicago (Illinois, USA), 6-9 septembre 2011

Position Control of Faulted Six-Phase Induction Machineusing Genetic Algorithms
Sdemped 2011, Bologna, Italy, September 2011

A PWM strategy dedicated to RMS current reduction in DC link capacitor of an embedded three phase inverter
14th European Conference on Power Electronics and Applications (EPE 2011), Birminghamb (UK), 30 août - 1er septembre 2011

Optimal Design of Inductors - Transformers Associated to Converters for Railway Application.
COMPUMAG 2011, Sidney (Australia), 12-15 July 2011

Coupled Numerical Simulation Between Electromagnetic and Structural Models. Influence of the supply harmonics on the vibrations for a WRSM.
COMPUMAG 2011, Sidney (Australia), 12-15 July 2011

Sensorless position control of six-phase induction machine using fuzzy-PI system
ISIE 2011 (IEEE International Symposium on Industrial Electronics), pp. 739-744, Gdansk, Poland, june 2011

Design of inductors - transformers associated to the converters for railway application.
ELECTRIMACS2011, Cergy-Pontoise, France, 6-8 Juin 2011

Semi-analytical Simulation of an Embedded PWM Inverter Dedicated to Automotive Applications
ELECTRIMACS2011, Cergy-Pontoise, France, 6-8 Juin 2011

Vibratory simulation tool for an electromagnetically excited non skewed electrical motor, case of the Wound Rotor Synchronous Machine.
ELECTRIMACS2011, Cergy-Pontoise, France, 6-8 Juin 2011

Position Control of Six-Phase Induction Machine using Fuzzy PI Controller Tuned by Genetic Algorithms.
Power ENG2011, Torremolinos, Spain, May 2011

Multiphysic Design Rules Applied To Inductors Or Transformers For Railway Application
IEMDC2011, Niagara Falls, USA, May 2011

Analysis on DC link filtering capacitor stress of an inverter for embedded systems.
Automotive Power Electronics, Montigny Le Bretonneux, France, 6-7 April 2011

Evaluation of a Planar Coil Model using Shell Elements
Progress In Electromagnetics Research Symposium 2011, Marrakesh, Morocco, 20-23 March 2011

Thermal modeling of industrial inductor and transformers associated to the converters
ICEM 2010, Rome, Italy, september 2010

Multi-physics modeling of industrial inductors associated to converters
VPPC 2010, Lille, France, september 2010

Influence of the load angle on the magnetic pressure harmonic content of a WRSM
IECON 2010 : The 36th Anuual Conference of the IEEE Industrial Electronics Society, Glendale, AZ, USA, 07-10 November 2010

Analyse des sollicitations sur les condensateurs de filtrage du bus continu d'onduleur pour applications embarquées en fonction de la stratégie de modulation.
EPF Electronique de Puissance du Futur, Saint-Nazaire, France, 30 Juin au 2 Juillet 2010

Analyse des sollicitations sur les condensdateurs de filtrage du bus continu d'onduleur pour applications embarquées.
Workshop 2emc 2010, Rouen, France, 18-19 novembre 2010

Behavior analysis of a brush machine by space vector theory
ICEM 2010 (International Conferecne on Electrical Machines), Rome, Italy, 6-8 septembre 2010

Improvements for multi objective optimizations using output space mapping technique
OIPE 2010 (Optimization and Inverse Problems in Electromagnetism), Sofia, Bulgarie, 14-18 septembre 2010

Experimental and numerical evaluation of iron losses in a claw pole car generator
Conférence IEEE ICEM 2010 (International Conference on Electrical Machines), Rome, Italy, 6-8 Septembre 2010.

Fast optimization of a linear actuator by space mapping using unique finite element model
ECCE 2010, IEEE Energy Conversion Congress and Exposition, Atlanta, Georgia, Paper #734

Experimental comparison between Wound Rotor and Permanent Magnet Synchronous machine for Integrated Starter Generator applications
ECCE 2010, IEEE Energy Conversion Congress and Exposition, Atlanta, Georgia, Paper #57

Identification of Photovoltaic Array Model Parameters. Modelling and Experimental Verification.
International Conference on Renewable Energies and Power Quality (ICREPQ’10), Granada (Spain), 23th to 25th March, 2010.

Ageing study of a supercapacitor-battery storage system
ICEM 2010 (International Conferecne on Electrical Machines), Rome, Italy, 6-8 septembre 2010

Design of a Supercapacitor-Battery Storage System for a Waste Collection Vehicle
IEEE VPPC2010, Lille, Septembre 2010

EV charging system with PV grid-connected configuration
IEEE VPPC2010, Lille, Septembre 2010

Improvement of an Automotive alternator using the Experimental Design Method
Conférence IEEE IEMDC 2009 (International Electric Machines and Drives Conference, Miami, Floride, USA 3-6 mai 2009

Control Strategies and Inverter Topologies for Stabilization of DC Grids in Embedded Systems
13th European Conference on Power Electronics and Applications EPE'2009, Barcelone, Espagne, 8-10 septembre 2009

Impact des stratégies de contrôle et des topologies d’onduleur sur la stabilisation du bus continu dans les systèmes embarqués
Conférence Electrotechnique du Futur EF’2009, Compiègne, 24-25 septembre 2009

Prediction of audible magnetic noise radiated by adjustable speed drive induction machines
IEEE IEMDC 2009, Miami, 3-6 May 2009

Comparison of optimization algorithms for the design of a BLDC machine with travel time minimization
Electromotion 2009, Lille, France, 1-3 July 2009

Permeance computation for determination of induction motor acoustic noise
ISEF 2009, Arras, France, 10-12 septembre 2009

Conception d'une machine synchro-réluctante de faible puissance sous fortes contraintes
EF 2009, Compiègne, France, 24-25 septembre 2009

Surveillance temps réel de batterie Li-Ion
EF 2009, Compiègne, France, 24-25 septembre 2009

Dimensionnement d'un actionneur linéaire à haute dynamique pour pompe à membranes
EF 2009, Compiègne, France, 24-25 septembre 2009

Optimisation multiphysique d'alterno-démarreurs synchrones à aimants enterrés par combinaison de modèles analytiques et éléments finis
EF 2009, Compiègne, France, 24-25 septembre 2009

Optimal design a high dynamic actuator for diaphragm pumps
IEMDC 2009, Mimai, Floride, USA, 3-6 mai 2009

Conception holistique des transformateurs pour une application ferroviaire
JCGE'09, Compiègne, France, 23 septembre 2009

Contribution à la modélisation des arcs électriques dans les machines à courant continu à collecteur mécanique
EF 2009, COmpiègne, France, 24-25 septembre 2009

Combination of Finite Element and Analytical Models in the Optimal Multi-Domain Design of Machines: Application to an Interior Permanent Magnet Starter Generator
IAS 08, 5-9 octobre 2008, Edmonton, Canada

Multiphysics modeling : electro-vibro-acoustics and heat transfer of induction machine
ICEM 08

Characterization of the audible magnetic noise emitted by traction motors in railway rolling stock
Inter-noise 08 : 37th International Congress and Exposition on Noise Control Engineering, Shangai, China, 26-29 octobre 2008

Impédancemétrie impulsionnelle pour batteries Li-Ion
JCGE'08, Lyon, France, 16-17 décembre 2008

Contribution au dimensionnement d'un actionneur pour accessoire automobile
JCGE'08, Lyon, France, 16-17 décembre 2008

Application of the VDA standard for the comparison and losses reduction of high efficiency car alternators
MELECON 2008, ©2008 IEEE, Ajaccio, France, 5-7 mai 2008

Optimisation d'un alternateur par la méthode des plans d'expérience
JCGE'08, Lyon, France, 16-17 décembre 2008

A New Predictive Current Controller Dedicated To Salient Pole Synchronous Machines
ICEM'08, XVIII International Conference on Electrical Machines, Vilamoura, Portugal, 6-9 septembre 2008

Modelling and Control of a Cascaded Doubly-Fed Induction Generator based on a Dynamical Equivalent Circuits
ELECTRIMACS'08, Québec, Canada, 8-11 juin 2008

A New Modeling of DC Machines Taking Into Account Commuitation Effects
Proceedings of the 2008 International Conference on Electrical Machines ICEM 2008, Vilamoura, Portugal, 6-9 septembre 2008

Optimisation des Paramètres Dimensionnels des Mahcines à Courant Continu par l'étude des Phénomènes de Commutation
JCGE'08, Lyon, France, 16-17 décembre 2008

A Coupled Magneto-thermal Model of Rotary Transformers for the Optimal Design of Claw Pole Alternators Excitation, SIA Automotive.
Power Electronics APE 07, 26-27 Septembre 2007, Paris, France.

Design of a Brushless Rotor Supply for a Wound Rotor Synchronous Machine for Integrated Starter Generator, 2007 IEEE Vehicle Power and Propulsion Conference.
VPPC07, 9-12 Septembre 2007, Arlington, Texas, USA.

Commande sans capteur de position d'un alterno-démarreur synchrone.
EF 2007, Toulouse, France, 6-7 septembre 2007.

Calcul du bruit acoustique d’une machine asynchrone à pas fractionnaire.
EF 2007, Toulouse, France, 6-7 septembre 2007.

Commande Prédictive Hybride d'une Génératrice Asynchrone à Double Alimentation.
Electrotechnique du Futur, EF'2007, Toulouse, France, 6-7 Sept. 2007.

"Sensorless Control of a Wound Rotor Synchronous Belt-Driven Starter-Alternator,"
EPE 2007, Aalborg, Denmark, 2-5 septembre 2007.

Inverter topology comparison for remedial solution in transistor faulty case.
EPE 2007, Aalborg, Denmark, 2-5 septembre 2007.

Sliding mode control of a doubly-fed induction generator.
EPE'2007 Conference, Aalborg, Danemark, 2-5 Sept. 2007.

Fault Tolerant Control using a Hybrid Predictive Strategy applied to a Current Controlled Four-Legged Three-Phase Converter.
in Proc. IET Colloquium on Reliability in Electromagnetic Systems 2007, CD-ROM, 24-25 Mai 2007, Clichy, France.

Comparison of Two Optimal Rotary Transformer Designs for Highly Constrained Applications.
International on Electrical Machines and Drives Conference IEMDC 07, 3-5 Mai 2007, Antalya, Turquie.

Acoustic noise of electromagnetic origin in a fractional-slot induction machine.
SSD 2007, Hammamet, Tunisie, 19-22 mars 2007.

Calcul de forces électromagnétiques dans le MAGSTREAM
NUMELEC 2007, Lille, France, Novembre 2007

Configuration d’une structure « Hallbach » par plans d’expériences treillis
EF 2007, Toulouse (FRANCE) – 6 au 7 septembre 2007.

Spread spectrum strategies study for induction motor vibratory and acoustic behavior.
IEEE IECON 2006, 7-10 novembre 2006, Paris - France.

Optimal control for a wound rotor synchronous starter generator.
IEEE Industrial Application Society Annual meeting; 8-12 Octobre 2006, Tampa Floride.

Temperature Supervision of an Integrated Starter Generator.
IEEE Industrial Application Society, Annual meeting, 8-12 Octobre 2006, Tampa Floride.

Vibratory and acoustic behavior of induction traction motors, machine design improvement .
IEEE Industrial Application Society Annual meeting; 8-12 Octobre 2006, Tampa Floride

A Fast Noise-Predictive Multiphysical Model of the PWM-controlled Asynchronous Machine.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Torque ripple improvement with IPMSM rotor shape modification.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Integration of an Induction Machine Synthesis in a Multiphysic Simulation Tool for Automotive Applications
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Dysfunctions of rotating magnetic density sorters induced by the distribution of the magnetic field and the dynamic behaviour of particles.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Simplified sensorless control technique for wound rotor synchronous motor.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Calculation of magnetic forces inside rotating non-magnetic particle sorters
EMF 2006 Aussois (FRANCE) – 19 au 22 juin 2006

Increasing reliability and compactess of an inverter dedicated to a starter generator application by the PWM strategy.
MIT/Industry Consortium on Advanced Automotive Electrical/Electronic Components and Systems Meeting Paris 19 ­ 20 June 2006.

Calcul de forces magnétiques dans le magstream
NUMELEC'06, Lille, les 29-30 novembre et 1er décembre 2006

"Comparaison de deux machines alternatives pour actionneur électrique 42 volts".
Conférence EF2005, Grenoble, 14-15 septembre 2005.

Design of a Predictive Current Controller for a Starter Generator Application
Conférence EPE2005 (European Power Electronics) September 2005 Dresden – Germany

Modification du Contrôleur de Courant à Hystérésis dans le but de Réduire les Pertes par Commutation dans un Onduleur Triphasé
Conférence Jeunes Chercheurs en Génie Electrique Juin 2005 Montpellier – France

Desing comparison of two rotating electrical machines for 42V electric power steering.
IEEE IEMDC 15-18 mai 2005 San Antonio TEXAS (USA).

Integrated Starter Generator: Need of an optimal desing and control approach. Application to a permanent magnet machine.
IEEE IEMDC 15-18 mai 2005 San Antonio TEXAS (USA).

Comparison between two Ni-mH battery Models.
Electrical Vehicle Symposium EVS 21, Monaco, Avril 2005.

Model based Battery Mananagement System for Ni-MH batteries Influence of the model and of the mode of implementation.
2éme séminaire franco-chinois sur les batteries avancées; Bordeaux 7-8 avril 2005.

Optimal control of an integrated induction starter generator.
IEEE-Vehicle Power and Propulsion, Paris Octobre 2004

Application of a 42V NiMH battery model to design a control law for a mild hybrid vehicule.
IEEE-Vehicle Power and Propulsion, Paris Octobre 2004.

A cross saturation model for interior permanent magnet synchronous machine. Application to a starter generator Congrès IEEE - Industry Application Society annual meeting (IAS), Seattle, Etats-Unis, Octobre 2004

A Comparison between Pulse Width Modulation Strategies in terms of Power Losses in a Three-Phased Inverter - Application to a Starter Generator
Congrès European Power Electronics – Power Electronics and Motion Control 2004, Riga , Lettonie. Septembre 2004

L. Chédot, G. Friedrich

A dynamic model for interior permanent magnet synchronous machine. Application to a starter-generator
International Conference on Electrical Machine (ICEM), Cracovie, Pologne, Septembre 2004.

"Vibro-acoustic optimization of a synchronous permanent magnet machine using the Experimental Design Method"
International Conference on Electrical Machine (ICEM), Cracovie, Pologne, Septembre 2004.

"Experimental Design Method applied to a multi-physical model: ‘Trellis’ designs for a multi-dimensional screening study"
OIPE 2004 Grenoble (POLOGNE) – 6 au 8 septembre 2004

Fractional and diffusive representation of a 42V NIMH Battery.
Congrés IFAC, Bordeaux juillet 2004 .
Sélectionné et paru dans le livre ‘Fractional differentiation and its applications’ Ubooks, ISBN 3-86608-026-3

Offline Optimized Pulse Pattern with a view to Reducing DC-Link Capacitor - Application to a Starter Generator
IEEE – Power Electronics Specialists Conference 2004, Aachen, Allemagne. Juin 2004

To an optimal control of an Integrated Starter Alternator using an induction machine.
2004 IEEE International Symposium on Industrial Electronics.
May 4-7, 2004, Palais des Congrès Expositions, Ajaccio, France.

Comparison of a natural sampling and random PWM control strategy for reducing acoustic annoyances.
European Power Electronics and drive conference (EPE 03), Toulouse, France, Septembre 2003.

Optimal control of interior permanent magnet synchronous integrated starter generator.
European Power Electronics and drive conference (EPE 03), Toulouse, France, Septembre 2003.

Improvement of AECV motorization with double rotor electrical motors.
5th International AECV Conference 2003, Angers, France, 2-5 juin 2003.

Comparison of direct and adaptative optimal controls for interior permanent magnet synchronous integrated starter generator.
IEEE International Electrical Machine and Drive Conference (IEMDC 03), Madison, Wisconsin, Etats-Unis, Juin 2003.

Emmanuel Kuhn, Christophe Forgez, Guy Friedrich.

Electric Equivalent Circuit of a Ni MH cell. Methods and results.
Electric Vehicle Symposium (EVS 2003) Los Angeles.

Commande optimale d'un alterno démarreur intégré : prise en compte de la saturation magnétique.
Electrotechnique du futur (EF 2003).

Modèle de batteries Ni-MH adapté au Génie Electrique. Description et validation expérimentale.
Electrotechnique du futur (EF 2003).

Optimisation de la commande d'un Alterno-Démarreur Intégré : influence de la résolution du capteur mécanique.
Journées des jeunes chercheurs en Génie Electrique; Saint Nazaire.

Modèle de batterie NiMH pour véhicule hybride parallèle : validation en grand signaux.
Journées des jeunes chercheurs en Génie Electrique; Saint Nazaire.

Modèle pour accumulateurs Ni-mH en vue d'une application pour véhicule électrique hybride.
Electronique de Puissance du Futur (EPF) - Novembre 2002 - Montpellier, France.

Vibrations and acoustic noise reduction in A.C. electrical drives. Use of analytical and experimental modal techniques.
ISMA - International Conference on Noise & Vibration Engineering - septembre 2002 - Louvain, Belgique.

Comparison of two optimal machine designs for integrated starter-generator applications.
ICEM 2002 (août) - Bruges, Belgique.

Optimization of the control of an Integrated Starter Alternator using an induction machine - Mechanical sensor role.
ICEM 2002 (août) - Bruges, Belgique.

Modélisation d'accumulateurs NI-mh en vue d'une application pour véhicule hydride électrique.
GEVIQ' 2002 (juin) - Marseille, France.

Simulation et optimisation de la commande d'un Alterno-Démarreur Intégré asynchrone.
Electrotechnique du futur - novembre 2001 - Nancy, France.

A developpment of an analytical model to compute the pulsating torques of an induction motor supplied by power converter.
Surveillance 4; 4-6 septembre 2001, Compiègne, France.

A method for choosing the power converter control strategy to reduce the acoustic noise by taking into account the mechanical structure response.
EPE 2001 - 27, 29 Août 2001 - Graz, Autriche.

'An extended Kalman filter and an appropriate model for the real time estimation of the induction motor variables and parameters', IASTED International Conference on Measurement and Control MECO 2001, 16-18 Mai 2001, Pittsburg, USA.

"Method to find the hybridization rate for a parallel hybrid electrical vehicle.
Congrés EVS-17, Montréal Octobre 2000.

Modelling of a wound rotor salient pole synchronous machine and its converter in the constant power zone.
Congrés EVS-17, Montréal Octobre 2000.

Modelisation of rotating magnetic fields in polyphase alternative machines supplied by power converters : use of harmonic techniques and matrix computation.
Vibrations and acoustic noise of electric machinery - Lodz (Juin 2000).

Analysis of the noise, vibration and transmission characterics of induction motors.
Inter noise 2000 (Nice, France).

Prise en compte de paramètre nuisance acoustique lors de la conception d'un ensemble machine électrique asynchrone - convertisseur statique de puissance.
GEVIQ'2000 - Marseille.

Système flou de supervision des modes de fonctionnement d'un véhicule hydride électrique parallèle.

"Fault detection of an induction motor bu state estimation, comparison of two approaches: set-membershit filtering and Kalman filtering".
Conférence Européenne de Contrôle (ECC'99).

Magnetostriction effects modelling.
1999 ASME - Mechanics & materials conference.
June 27-30, 1999 - Blacksburg, Virginia, USA.

"Estimation paramétrique de la machine asynchrone. Etude comparative de deux algorithmes".
3ème Conférence Internationale sur l'Automatisation Industrielle de Montreal, 7-9 Juin 1999.

"An appropriate model for the real-time identification of the induction motor by an extended Kalman filter".
Conférence Européenne de Contrôle (ECC'99).

"Etude de faisabilité d'un alterno-démarreur intégré. Comparaison des solutions asynchrone et synchrone à rotor bobiné".
La conversion électromécanique directe - ENS Cachan SEE.

"Moteur roue à deux axes intégrés".
Congrès CEMD'99 - 4 février - ENS Cachan - pp 107-110.

"Modelling of quai-static ferromagnetic behaviour ".
J. Physique IV - 8 -Pr2-607.

"Comparative study of two AC brushless machines in automotive applications: the induction machine and the wound rotor synchronous machine".
EVS 15; BRUXELLES; 1-3 octobre 1998

"Acoustic noise generated by the association of an induction machine and a natural sampling power converter".
International seminar on vibations and acoustic noise of electric machinery; Béthune 25-26 mai 1998.

"An experimental comparison of seven non linear controllers for power converters".
Proceedings of the 36th IEEE Conference, Decision and control,Vol 1, pp 227-228, 1997.

"Theoretical and Experimental Comparison of two nonlinear controllers for current-fed induction motors".
IEuropean Control Conference. Bruxelles 1-4 juillet 1997.

"Comparative and experimental study between a synchronous poles and wound rotor and a permanent magnet machine in automotive applications".
ISATA 96, Florence, pp 151-157, Juin 1996.

"Criteria for the evaluation of three-phase PWM strategies in the case of vectorial approach".
PEMC'96, Budapest, Vol 2, pp 579-583, 1996.

"Une stratégie de modulation du vecteur d'espace pour un onduleur de tension triphasée : la modulation Delta Sigmavectorielle".
Firelec, pp 158-161, 1996.

"Experimental noise characterization for induction motoridentification".
ELECTRIMACS 96, St Nazaire, 17-19 Septembre 96, Vol. 2, pp787-792.

"Recursive least-squares implementation for induction motorparameter estimation".
ELECTRIMACS 96, St Nazaire, 17-19 Septembre 96, Vol. 3, pp953-958.

"Contribution for choosing a model for the induction machine in electrical automotive applications".
IMACS 96, SAINT NAZAIRE ; pp181-186, Septembre 1996.

"Pratical application of passivity based on control forInduction Motors".
CESA'96 IMACS Multiconference, LILLE, 9-12 Juillet 1996.