Revues internationales avec comité de lecture




2024	Aloui, R.; Gaha, R.; Lafarge, B.; Celik, B.; Verdari, C. Life Cycle Assessment of Piezoelectric Devices Implemented in Wind Turbine Condition Monitoring Systems Energies 2024, 17, 3928 Digital Object Identifier : 10.3390/en17163928 S. Benharref, V. Lanfranchi, D. Depernet, T. Hamiti, S. Bazhar Full harmonic spectrum calculation of magnetic pressures in synchronous permanent magnet machines based on a new realistic partial analytical model: application to SVPWM and DPWM2 COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 43 No. 3, pp. 535-550, March 2024 Digital Object Identifier : 10.1108/COMPEL-11-2023-0564 ISSN: 0332-1649 M. A. Hizami Bin Rasid, V. Lanfranchi, A. Ospina, K. Benkara Influence of Temperature on Power Factor and Operating Area of SynRM Machine in Automotive Equipment International Journal of Power Electronics and Drive Systems (IJPEDS). Vol. 15, No. 1, pp. 117~126, March 2024 Digital Object Identifier : 10.11591/ijpeds.v15.i1.pp117-126 ISSN: 2088-8694 Daniel Sting Martinez-Padron, Nicolas Patin and Eric Monmasson Gate-Driving Performance Evaluation Based on a New Figure of Merit Electronics 2024, 13, 609, 1 February 2024 Digital Object Identifier : 10.3390/electronics13030609
2023	J.Hallal, M. Hammoud, F. Druesne, H. Issa, V. Lanfranchi, J.D. Chazot Tooth Base Geometrical Variability Effect on the Vibration Behavior of the Stator International Journal of Acoustics and Vibration, Vol. 28, No. 2, (pp. 165–172), 2023 Digital Object Identifier : 10.20855/ijav.2023.28.21927 Célien Bergeron, Stéphane Vivier Optimization of material distribution applied to magnet-free rotors of synchronous motors Mathematics and Computers in Simulation, 2023, 12 September 2023 Digital Object Identifier : 10.1016/j.matcom.2023.08.043 Khadija El Kadri Benkara, Amalie Alchami, Achraf Nasser Eddine, Ghada Bakaraki, Christophe Forgez Field programmable gate arrays implementation of a Kalman filter based state of charge observer of a lithium ion battery pack Journal of Energy Storage, Volume 70, 15 October 2023 Digital Object Identifier : 10.1016/j.est.2023.107860
2021	M. Jeannerot, M. Ouisse, V. Lanfranchi, J-B. Dupont, E. Sadoulet-Reboul Two-level global sensitivity analysis of the excitation contributions leading to acoustic noise in an electric motor for the purpose of robust optimization IET Electric Power Applications, Volume 15, Issue 12 , pp. 1666–1677, December 2021 Digital Object Identifier : 10.1049/elp2.12129 K. Mergo Mbeya, N. Damay, G. Friedrich, C. Forgez, M. Juston Off-line method to determine the electrode balancing of Li-ion batteries Mathematics and Computers in Simulation, Volume 183, pp. 34-47, May 2021 Digital Object Identifier : 10.1016/j.matcom.2020.05.013 Nicolas Patin, Zakaria Chmeit, Georges Salloum, Rita Mbayed Study of interleaved PWM strategies applied to two back-to-back three-phase full bridges Mathematics and Computers in Simulation, Volume 184, pp. 55-68, June 2021 Digital Object Identifier : 10.1016/j.matcom.2020.02.006 Maxime Juston, Nicolas Damay, Christophe Forgez, Guy Friedrich, Stephane Vivier, Karrick Mergo Mbeya, Bogdan Vulturescu Direct determination of a single battery internal resistances distribution using a heterogeneous model Mathematics and Computers in Simulation, Volume 183, pp. 20-33, May 2021 Digital Object Identifier : 10.1016/j.matcom.2020.01.015 Stephane Vivier Graphical predetermination of optimal machine designs by iso-performance configuration modeling Mathematical and Computers In Simulation, Vol 184, pp 165-183, June 2021 Digital Object Identifier : 10.1016/j.matcom.2020.02.025 Iman Kleilat, Khadija El Kadri Benkara, Guy Friedrich, Stéphane Vivier, Nazih Moubayed and Rabih Dib Comparison of Two Analytical Methods for Calculating the Maximum Mechanical Stress in the Rotor of High-Speed-Assisted Synchronous Reluctance Machines IEEE Transactions on Industry Applications, Vol 7, N°2, pp 1344-1353, March/April 2021 Digital Object Identifier : 10.1109/TIA.2020.3040946 Barbara Lafarge, Sébastien Grondel, Christophe Delebarre, Octavian Curea, Claude Richard Linear electromagnetic energy harvester system embedded on a vehicle suspension : From modeling to performance analysis Energy, Vol 225, Article 119991, 15 June 2021 Digital Object Identifier : j.energy.2021.119991 E. Uygun, M. Hecquet, A. Touzi, D. Depernet, V. Lanfranchi, S. Bruno, T. Tollance Influence of the load angle on magnetic radial forces and torque ripple of a low power permanent magnet synchronous machine Mathematics and Computers in Simulation, Vol. 184, pp.153-164, June 2021 Digital Object Identifier : 10.1016/j.matcom.2020.05.020 H. Wu, D. Depernet, V. Lanfranchi, K El Kadri-Benkara and M.A.H. Rasid A Novel and Simple Torque Ripple Minimization Method of Synchronous Reluctance Machine Based on Torque Function Method IEEE Transactions on Industrial Electronics, Vol 68, N°1, pp92-102, January 2021 Digital Object Identifier : 10.1109/TIE.2019.2962490
2020	Iman Kleilat, Khadija El Kadri Benkara, Guy Friedrich, Stephane Vivier, Nazih Moubayed, Rabih Dib Comparison of two Analytical Methods for Calculating the Maximum Mechanical Stress in the Rotor of High Speed Assisted Synchronous Reluctance Machines IEEE Transactions on Industrial Electronics, 26 November 2020 Digital Object Identifier : 10.1109/TIA.2020.3040946 D. Giraud, B. Ristagno, D. Netter, J. Fontchastagner, N. Labbe, V. Lanfranchi Axial claw pole motort : harmonic torque estimation using finite element method Compel, 2020 Digital Object Identifier : 10.1108/COMPEL-01-2020-0024 P. Gning, V. Lanfranchi, N. Dauchez Inlfuence of th emulti-component electrical feed of air-core industrial reactors on their sound radiation Acta Acustica, Volume 4, Number 4, 2020 Digital Object Identifier : 10.1051/aacus/2020015 M.A.H. Rasid, V. Lanfranchi, A. Ospina, K. El Kadri-Benkara Torque Ripple Analysis of Synchronous Reluctance Motor with Different Rotor Topologies for Application with Dimensional Constraint Journal of Electrical Engineering and Technology, Vol 15, Issue 4, pp 2167-2177, July 2020 Digital Object Identifier : 10.1007/s42835-020-00493-8 D. Giraud, B. Ristagno, J. Fontchastagner, D. Netter, N. Labbe, V. Lanfranchi and N. Takorabet Simple Method to Reduce Computation Time in Palanr Air-Gap 3-D FEM Non-Linear Problems IEEE Transactions on Magnetics, Vol 56, N°2, pp1-4, Feb 2020 Digital Object Identifier : 10.1109/TMAG.2019.2947182
2019	El Mahdi Khetabi, Khadidja Bouziane, Nada Zamel, Xavier François, Yann Meyer, Denis Candusso Effects of mechanical compression on the performance of polymer electrolyte fuel cells and analysis through in-situ characterisation techniques - A review Journal of Power Sources, Volume 424, pp. 8-26, 1 June 2019 Digital Object Identifier : 10.1016/j.jpowsour.2019.03.071 O. Lahyaoui, V. Lanfranchi, N. Buiron, F. Martin, U. Aydin, A. Belahcen Effect of mechanical stress on magnetization and magnetostriction strain behavior of non-oriented Si-Fe steels at different directions and under pseudo-DC conditions International Journal of Applied Electromagnetics and Mechanics, Volume 60, Numero 2, pp. 299-312, May 2019 Digital Object Identifier : 10.3233/JAE-180106 Diampovesa S., Hubert A., Yvars P.-A., Meyer Y. and Zimmer L. Optimal design for electromagnetic devices. A synthesis approach using intervals and constraint-based methods International Journal of Applied Electromagnetics and Mechanics, Volume Pre-press, Numero Pre-press, pp. s1-s14, 2019 Digital Object Identifier : 10.3233/JAE-191104 C. Tuloup, W. Harizi, Z. Aboura, Y. Meyer, K. Khellil and R. Lachat On the use of in-situ piezolectric sensors for the manufacturing and structural health monitoring of polymermatrix composites : A literature review Composite Structures, Volume 215, pp. 127-149, 1 May 2019 Digital Object Identifier : 10.1016/j.compstruct.2019.02.046 Meyer Y., Lachat R. and Akras, G. A review of manufacturing techniques of smart composite structures with embedded bulk piezoeclectric transducers Smart Materials and Structures, Volume 28, Numero 5, May 2019 Digital Object Identifier : 10.1088/1361-665X/ab0fab Paul Gning, Vincent Lanfranchi, NicolasDauchez, Kaiss Bouayed Multiphysics model for predicting the sound radiation of a single-layer air-core coil Applied Accoustics, Volume 146, pp. 327-333, March 2019 Digital Object Identifier : 10.1016/j.apacoust.2018.11.021 X. Chen, Y. Meyer, R. Lachat, M. Ouisse Experimental investigation on the influence of a "soft layer" on the structural performance of a smart composite structure SN Applied Sciences(2019) , 1:242 , February 2019 Digital Object Identifier : 10.1007/s42452-019-0250-910.1007/s42452-019-0250-910.1007/s42452-019-0250-910.1007/s42452-019-0250-910.1007/s42452-019-0250-9 Maria El Achkar , Rita Mbayed , Georges Salloum , Nicolas Patin , Eric Monmasson Voltage Control of a Standalone Cascaded Doubly Fed Induction Generator IEEE Transactions on Industrial Electronics, Volume 66, Issue 1, pp. 762-771, January 2019 Digital Object Identifier : 10.1109/TIE.2018.2856186
2018	A. Rasid, N. Abdullah, I. Siraji, A. Razali, H. Peeie, I, Ishak, A. Ospina, V. Lanfranchi Preliminary Thermal Evaluation of Actuator for Steer-by-Wire Vehicle IEEE Transactions Vehicular Technology, early 2018 Digital Object Identifier : 10.1109/TVT.2018.2872882 Otmane Lahyaoui, Vincent Lanfranchi, Nicolas Buiron, Jean-Daniel Chazot and Christophe Langlois Investigation on Machanical Resonance Induced by Magnetostriciton in a Structure Based on Si-Fe Sheets IEEE Transactions on Magnetics, Volume 54, Issue 12, December 2018 Digital Object Identifier : 10.1109/TMAG.2018.2873109 H. Wu, D. Depernet, V. Lanfranchi Analysis of torque ripple reduction in a segmented-rotor synchronous reluctance machine by optimal currents MATCOM, Elsevier, online 25 July 2018 Digital Object Identifier : 10.1016/j.matcom.2018.07.001 Stéphane Vivier Application of the corrected response surface methodology for the optimization of a permanent magnet synchronous machine COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol 37, Issue 2, pp.740-754, 2018 Digital Object Identifier : 10.1108/COMPEL-11-2016-0480 Stéphane Vivier, Guy Friedrich Comparison between Single-Model and Multimodel Optimization Methods for Multiphysical Design of Electrical Machines IEEE Transaction on Industry Applications, Vol 54, Issue 2, pp.1379-1389, march-april 2018 Digital Object Identifier : 10.1109/TIA.2017.2784805
2017	S. El Oualid, R. Lachat, D. Candusso, Y. Meyer Characterization process to measure the electrical contact resistance of Gas Diffusion Layers under mechanical static compressive loads International Journal of Hydrogen Energy, Vol 42, Issue 37, pp. 23920-23931, May 2017 Digital Object Identifier : 10.1016/j.ijhydene.2017.03.130 X. Chen, R. Lachat, S. Salmon, M. Ouisse and Y. Meyer Complex composite structures with integratedpiezoelectric transducers International Journal of Computational Methods and Experimental Measurements, Vol 5, Issue 2, pp.125-134, 2017 Digital Object Identifier : 10.2495/CMEM-V5-N2-125-134 Bassel Assaad, Khadija El Kadri Benkara, Stéphane Vivier, Guy Friedrich, Antoine Michon Thermal Design Optimization of Electric Machines Using a Global Sensitivity Analysis IEEE Transaction on Industry Applications, Vol 53, Issue 6, pp.5365-5372, november-december 2017 Digital Object Identifier : 10.1109/TIA.2017.2746015 M.A.H. Rasid, V. Lanfranchi, K. El Kadri Benkara Fast Electro-Mechanical Performance Evaluation Tool for Synchronous Reluctance Machine International Journal of Precision Engineering and Manufacturing, Springer, Vol 18, Issue 11, pp 1567-1573, november 2017 Digital Object Identifier : 10.1007/s12541-017-0186-1 A. Tan-Kim, N. Hagen, V. Lanfranchi, S. Clénet, T. Coorevits, J-C. Mipo, J. Legranger, F. Palleschi Influence of the Manufacturing Process of a Claw-Pole Alternatoron Its Stator Shape and Acoustic Noise IEEE Transactions on Industry Applications, Vol 53, Issue 5, pp 4389-4395, october 2017 Digital Object Identifier : 10.1109/TIA.2017.2708019 K. Bouayed, L. Mebarek, V. Lanfranchi, J.-D. Chazot, R. Marechal, M.-A. Hamdi Noise and vibration of a power transformer under an electrical excitation Applied Acoustics, Vol 128, pp 64-70, december 2017 Digital Object Identifier : 10.1016/j.apacoust.2017.05.020 Nicolas Damay, Christophe Forgez, Guy Friedrich, Marie-Pierre Bichat Heterogeneous behavior modeling of a LiFePO₄-graphite cell using an equivalent electrical circuit Journal of Energy Storage, Volume 12, pp 167-177, August 2017 Digital Object Identifier : 10.1016/j.est.2017.04.014 Ayoub Ben Nachouane, Abdenour Abdelli, Guy Friedrich and Stéphane Vivier Numerical Study of Convective Heat Transfer in the End Regions of a Totally Enclosed Permanent Magnet Synchronous Machine IEEE Transactions on Industry Applications, Volume 53, Issue 4, pp 3538-3547, July-August 2017 Digital Object Identifier : 10.1109/TIA.2017.2691731
2016	F. Druesne, J. Hallal, P. Lardeur , V. Lanfranchi Modal stability procedure applied to variability in vibration from electromagnetic origin for an electric motor Finite Elements in Analysis and Design, Vol 122, pp 61-74, December 2016 B. Iamamura, M. Rossi, M. Hecquet, V. Lanfranchi, S. Recorbet, F. Tridon Vibration and acoustic noise of industrial inductors associated to converters in the railway domain: Design and material impacts COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 35 Iss: 6, pp.1900 – 1909, Nov. 2016 Nicolas Damay, Christophe Forgez, Marie-Pierre Bichat, Guy Friedrich A method for the fast estimation of a battery entropy-variation high-resolution curve - Application on a commercial LiFePO4/graphite cell Journal of Power Sources 332 (2016), pp.149-153 Digital Object Identifier : 10.1016/j.jpowsour.2016.09.083 Sulivan Kuttler, Khadija El Kadri Benkara, Guy Friedrich, Abdenour Abdelli, Franck Vangraefschepe Fast iron losses model of stator taking into account the flux weakening mode for the optimal sizing of high speed permanent internal magnet synchronous machine Mathematics and Computers in Simulation 131 (2017), pp. 328-343 Digital Object Identifier : 10.1016/j.matcom.2016.06.009 Clément Edouard, Martin Petit, Christophe Forgez, Julien Bernard, Renaud Revel Parameter Sensitivity Analysis of a Simplified Electrochemical and Thermal Model for Li-ion Batteries Aging. Journal of Power Sources A. Tan-Kim, V. Lanfranchi, S. Vivier, J. Legranger, F. Palleschi Vibro-acoustic simulation and optimization of a claw-pole alternator IEEE Transactions on Industry Applications , vol 52, no 5, pp 3878-3885, Sept 2016 Antoine Tan-Kim, Vincent Lanfranchi, Jérôme Legranger, Frédéric Palleschi A hybrid electromagnetic model for acoustic optimization of claw-pole alternators International Journal of Applied Electromagnetics and Mechanics, Vol. 51, N° S1, ppS3-S11, April 2016 Digital Object Identifier : 10.3233/JAE-2023 Serigne Saliou Mbengue, Nicolas Buiron and Vincent Lanfranchi An Anisotropic Model for Magnetostriction and Magnetization Computing for Noise Generation in Electric Devices Sensors 2016, Volume 16,Issue 4, 553 Digital Object Identifier : 10.3390/s16040553 Nicolas Patin, Romain Cousseau, Eric Monmasson Impact of Thermal Stress on the Ageing Behaviour of Aluminum Electrolytic Capacitors for Automotive Applications EPE Journal Digital Object Identifier :10.1080/09398368.2016.1264119 Radhouane Khlissa, Stephane Vivier, Guy Friedrich, Khadija El Kadri Benkara and Bassel Assaad Thermal modelling of an asymmetrical totally enclosed permanent magnet integrated starter generator Mathematics and Computers in Simulation (2016) Digital Object Identifier : 10.1016/j.matcom.2015.06.015 Serigne Saliou Mbengue, Nicolas Buiron, Vincent Lanfranchi Macroscopic modeling of anisotropic magnetostriction and magnetization in soft ferromagnetic materials Journal of Magnetism and Magnetic Materials, Volume 404, pp. 74-78, April 2016 Digital Object Identifier 10.1016/j.jmmm.2015.12.001 Olfa Meksi, Mohd Azri Hizami Rasid, Alejandro Ospina and Vincent Lanfranchi Determination of Thermal Contact Resistances for Small TENV Electrical Machine Sensors & Transducers Journal, vol. 198, no 3, pp. 44-54, March 2016 Hossam Al-Ghossini, Fabrice Locment, Manuela Sechilariu, Laurent Gagneur, Christophe Forgez Adaptative -tuning of extended Kalman filter used for small scale wind generator Renewable Energy, Volume 85, pp. 1237-1245, January 2016 Digital Object Identifier : 10.1016/j.renene.2015.07.073
2015	R. Cousseau, N. Patin, C. Forgez, E. Monmasson, L. Idkhajine Improved electrical model of aluminium electrolytic capacitor with anomalous diffusion for health monitoring Mathematics and Computers in Simulation, 2015 Digital Object Identifier : 10.1016/j.matcom.2015.08.014 Maria El Achkar, Rita Mbayed, Georges Salloum, Nicolas Patin, Sandrine Le Ballois, Eric Monmasson Power operating domain of a cascaded doubly fed induction machine Mathematics and Computers in Simulation, 2015 Digital Object Identifier : 10.1016/j.matcom.2015.02.002 S. Küttler, K. El Kadri Benkara, G. Friedrich, A. Abdelli, F. Vangraefshepe Optimal sizing of permanent magnet synchronous machine for a given profile for hybrid application European Journal of Electrical Engineering, Vol. 17, N° 5-6, 2014, pp.439-453 Digital Object Identifier : 10.3166/ejee.17.439-453 Nicolas Patin, Romain Cousseau, Najib Rouhana, The Dung Nguyen PWM strategies dedicated to three-phase two-levels VSI and their impact on AC drives European Journal of Electrical Engineering, Vol. 17, N° 3-4, 2014, pp.203-231 Digital Object Identifier : 10.3166/ejee.17.203-231 Davinson Castaño-Cano, Mathieu Grossard and Arnaud Hubert Multi-axis force sensing using a resonant composite piezoelectric plate : model and experiments IOP Publishing Smart Materials and Structures, Vol. 24, Issue 5, May 2015 Digital Object Identifier 10.1088/0964-1726/24/5/055019 M. Fakam, M. Hecquet, V. Lanfranchi, A. Randria Design and magnetic noise reduction of the Surface Permanent Magnet Synchronous Machine using complex air-gap permeance IEEE Transactions on Magnetics, Vol 51, issue 4, part 1, 2015 Digital Object Identifier : 10.1109/TMAG.2014.2360315 Nicolas Damay, Christophe Forgez, Marie-Pierre Bichat, Guy Friedrich Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation Journal of Power Sources, Vol. 283(2015) ,pp 37-45
2014	Roba El Khoury Moussa, Mathieu Grossard, Mehdi Boukallel, Arnaud Hubert, Nicolas Chaillet Modelling and control of a piezoelectric microactuator with proprioceptive sensing capabilities Mechatronics,Volume 24, Issue 6, pp 590-604, September 2014 Digital Object Identifier 10.1016/j.mechatronics.2013.12.002 M. Moghadasian, R. Kianinezhad, F. Betin, V. Lanfranchi, A. Yazidi, G.-A. Capolino Particle-swarm-optimized tuning for fuzzy-logic position control of faulted-mode six-phase induction machine ELECTROMOTION,Vol 21, N° 1 – 2, pp 85-94, Jan – June 2014 B. Vulturescu, S. Butterbach, C. Forgez Experimental Considerations on the Battery Lifetime of a Hybrid Power Source Made of Ultracapacitors and Lead-Acid Batteries Emerging and Selected Topics in Powers Electronics, IEEE Journal of Emerging and Selected Topics in Power Electronics, Volume 2, Issue 3, September 2014, Pages 701-709 Digital Object Identifier 10.1109/JESTPE.2014.2316602 O. Maloberti, A. Gimeno, A. Ospina, G. Friedrich, K. El Kadri Benkara, L. Charbonnier Thermal Modelling of a Claw-Pole Electrical Generator : Steady-State Computation and Identification of free and forced Convection coefficients IEEE Transactions on Industry Applications, Volume 50,No 1, pp279-287, January/February 2014 Digital Object Identifier : 10.1109/TIA.2013.2270222
2013	T.D. Nguyen, N. Patin, G. Friedrich Extended Double Carrier PWM Strategy Dedicated to RMS Current Reduction in DC Link Capacitors of Three-Phase Inverters IEEE Transactions on Power Electronics, Vol. 29, No. 1, January 2014, pp. 396-406 Digital Object Identifier 10.1109/TPEL.2013.2251005 Maalej Fedia, Jérôme Antoni, Fakhfakh Taher, Vincent Lanfranchi, Haddar Mohamed Wavelet-based non-stationary near-field acoustical holography Applied Acoustics, Elsevier, Vol 74, Issue 11, November 2013, Pages 1226–1233. L. Gagneur, A.L. Driemeyer-Franco, C. Forgez, G. Friedrich Modeling of the diffusion phenomenon in a lithium-ion cell using frequency or time domain identification Microelectronics Reliability Volume 53, Issue 6, June 2013, Pages 784–796
2012	Stéphane Vivier, Didier Lemoine and Guy Friedrich Improvements dor multi-objective optimizations using output space mapping technique COMPEL, Volume 31, Issue 3, pp827-841, 2012 Digital Object Identifier : 10.1108/03321641211209735 P.Pellerey, V. Lanfranchi, G. Friedrich Coupled Numerical Simulation Between Electromagnetic and Structural Models. Influence of the Supply Harmonics for Synchronous Machine Vibrations IEEE Transactions on Magnetics, Volume 48, Issue 2, pp983 - 986, 2012 Digital Object Identifier : 10.1109/TMAG.2011.2175714 D. V. Do, C. Forgez, G. Friedrich Observateur d’état de charge de batterie Li-ion European Journal of Electrical Engineering (EJEE), Volume 15, N°1, pp81-100, 2012 Digital Object Identifier : 10.3166/EJEE.15.81-100
2011	S. Vivier, D. Lemoine, G. Friedrich Fast Optimization of a Linear Actuator by Space Mapping Using Unique Finite-Element Model IEEE Transactions on Industry Applications, Volume 47, Issue 5, pp2059 - 2065, 2011 Digital Object Identifier : 10.1109/TIA.2011.2162050 The Dung Nguyen, J. Hobraiche, N. Patin, G. Friedrich, J.P. Vilain A Direct Digital Technique Implementation of General Discontinuous Pulse Width Modulation Strategy IEEE Transactions on Industrial Electronics, Volume 58 , Issue 9, pp4445 - 4454, Sept. 2011 Digital Object Identifier : 10.1109/TIE.2010.2102311 J. Le Besnerais, A. Fasquelle, V. Lanfranchi, M. Hecquet, P. Brochet « Mixed-variable of optimal design of induction motors including efficiency, noise and thermal criteria ». Optimization and engineering, Springer, Vol 12, Numbers 1-2, pp55-72, 2011 Digital Object Identifier : 10.1007/s11081-010-9115-1 J. Legranger, G. Friedrich, S. Vivier, J.C. Mipo Optimisation multiphysique d'alterno-démarreurs par combinaison de modèles analytiques et éléments finis European Journal of Electrical Engineering (EJEE), Volume 14, N° 2-3/2011, pp165-182, Mars/Juin 2011 Digital Object Identifier : 10.3166/EJEE.14.165-182 O. Maloberti, G. Krebs, C. Marchand, D. Condamin, L. Kobylanski, E. Bomme Modélisation Electromagnétique et Thermique d'un Moteur à Flux Axial et à Aimants Permanents. European Journal of Electrical Engineering (EJEE) - Numéro spécial Juin 2011 D. V. Do, C. Forgez, K. El Kadri Benkara, G. Friedrich Surveillance temps réel de batterie Li-ion. European Journal of Electrical Engineering (EJEE), Volume 14, N°2-3/2011, pp.383-397, Mars/Juin 2011 Digital Object Identifier : 10.3166/EJEE.14.383-397
2010	I. Houssamo, M. Sechilariu, F. Locment, G. Friedrich Identification of Photovoltaic Array Model Parameters. Modelling and Experimental Verification RE&PQJ-8 Renewable Energy & Power Quality Journal N°8, 6 pages, 2010 A. Ospina, L. Santandrea, Y. Le Bihan, C. Marchand Modeling of thin structures in eddy current testing with shell elements EPJ Applied Physics, Vol 52, Issue 2, pp 23303-233308, 2010 J. Le Besnerais, A. Fasquelle, M. Hecquet, J. Pelle, V. Lanfranchi, S. Harmand, P. Brochet and A. Randria Multiphysics modeling : electro-vibro acoustics and heat transfer of PWM-fed induction machines IEEE Trans. On Ind Elec, Vol 57, N°4, pp 1279-1287, April 2010 J. Le Besnerais, V. Lanfranchi, M. Hecquet and P. Brochet Characterization and reduction of audible magnetic noise due to PWM supply in induction machine IEEE Trans. On Ind Elec, Vol 57, N°4, pp 1288-1295, April 2010 N. Patin, E. Monmasson, J.-P. Louis Modeling and Control of a Cascaded Doubly-Fed Induction Generator based on Dynamical Equivalent Circuits Mathematics ans Computers in Simulation, Vol 81, N°2, pp 225-238, Octobre 2010 J. Le Besnerais, V. Lanfranchi, M. Hecquet, P. Brochet, G. Friedrich Prediction of audible magnetic noise radiated by adjustable speed drive induction machines IEEE Trans. On Ind Appl, Vol 46, N°4, pp 1367-1373, August 2010 J. Le Besnerais, V. Lanfranchi, M. Hecquet, G. Friedrich Permeance computation for determination of induction motor acoustic noise Revue internationale d'électrotechnique "Przeglad Elektrotechniczy". Vol 2010,N°5, pp91-95, May 2010 J. Legranger, G. Friedrich, S. Vivier, J.C. Mipo Combination of finite element and analytical models in optimal multiphysic design : Application to an interior parmanent magnet starter generator. IEEE Transactions on Industry Applications, Proceedings Vol.46, n°1, pp. 232-239, January / February 2010 C. Forgez, D.V. Do, G. Friedrich, M. Morcrette, C. Delacourt Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery Journal of Power Sources, Volume 195, Issue 9, Pages 2961-2968, 1 May 2010
2009	A. Ospina, L. Santandrea, Y. Le Bihan and C. Marchand Electromagnetic Field Computation in Magnetic and Conductive Thin Sheets Senseor Letters, Volume 7, Isuue 3, pp 480-485, June 2009 G. Friedrich, A. Girardin Integrated starter generator : design, principle, contraints and optimal control IEEE Industry Applications Magazine, 15 (4) : 26-34 D.V. Do, C. Forgez, K. El Kadri Benkara, G. Friedrich Impedance Observer for a Li-Ion Battery Using Kalman Filter IEEE Transactions On Vehicular Technology 58 (8) : 3930-3937 J. Hobraiche, J.-P. Vilain, P. Macret, N. Patin A New PWM Strategy to Reduce the Inverter Input Current Ripples IEEE Transactions on Power Electronics, Vol. 24, No. 1 , pp. 172-180, January 2009 N. Patin, E. Monmasson, J.-P. Louis Modeling and Control of a Cascaded Doubly Fed Induction Generator Dedicated to Isolated Grids IEEE Transactions On Industrial Electronics, Vol. 56, No. 1, pp. 4207-4219, October 2009 J. Le Besnerais, V. Lanfranchi, M. Hecquet, P. Brochet Characterization of the audible magnetic noise emitted by traction motors in railway rolling stock Noise Control Eng. Journal, Vol 57, N°5, pp391-399, Sept 2009. J. Le Besnerais, V. Lanfranchi, M. Hecquet, G. Friedrich, P. Brochet Characterisation of radial vibration force and vibration behaviour of a PWM-fed fractional-slot induction machine IET, Electric Power Applications, Vol 3, Issue 3, p. 197-208, May 2009 J. Le Besnerais, V. Lanfranchi, M. Hecquet, G. Lemaire, E. Augis, P. Brochet Characterisation and reduction of magnetic noise due to saturation induction machines IEEE Transactions on Magnetics, Vol. 45, N° 4, pp 2003-2008, April 2009 J. Le Besnerais, V. Lanfranchi, M. Hecquet, P. Brochet Optimal Slot Numbers for Magnetic Noise Reduction in Variable-Speed Induction Motors IEEE Transactions on Magnetics, Vol.45, N°8, pp 3131-3136, August 2009 J. Le Besnerais, V. Lanfranchi, M. Hecquet, R. Romary and P. Brochet Optimal Slot Opening Width for Magnetic Noise Reduction in Induction Motors IEEE Trans. on En. Conv. Vol 24, N°4, pp 869-874, Dec 2009 F. Locment, M. Sechilariu, C. Forgez, G. Friedrich Représentation énergétique macroscopique et strcuture maximale de commande d'un réseau semi-isolé : Application à une installation photovoltaïque alimentant un bâtiment basse consommation EJEE - 12/2009. Réseaux isolés, pages 609 à 637, ©2009 Lavoisier, Paris
2008	N. Patin, L. Vido, E. Monmasson, J.-P. Louis, M. Gabsi, M. Lecrivain Control of a Hybrid Excitation Synchronous Generator for Aircraft Applications IEEE Transaction on Inductrial Electronics, Volume 55, Issue 10, pp 3772 - 3783, October 2008 J. Le Besnerais, V. Lanfranchi, M. Hecquet, P. Brochet, G. Friedrich Acoustic noise of electromagnetic origin in a fractionnal-slot machine COMPEL, Vol. 27, N°5, 2008 J. Le Besnerais, V. Lanfranchi, M. Hecquet, P. Brochet Multi-objective optimization of induction machines including mixed variables and noise minimization IEEE Transaction on Magnetics, Vol. 44, N°6, pp 1102-1105, 2008
2007	J. Le Besnerais, M. Hecquet, V. Lanfranchi, P. Brochet Multi-objective optimization of the induction machine with minimization of audible electromagnetic noise. EPJ AP 2007, (n°39, pp 101-107 ). E. Foulon, C. Forgez, L. Loron Resistances estimation with an extended Kalman filter in the objective of real time thermal monitoring of the induction machine, IEE Electric Power Applications, Volume 1, Issue 4 , p. 549-556, July 2007 W. Naouar, A. Ammar Naassani, E. Monmasson, I Slama-Belkodja, N. Patin FPGA-Based Current Controllers for Synchronous Machine Drive. IEEE Transactions on Industrial Electronics, Vol. 54, No. 4, Numéro spécial "FPGA in Industrial Control Systems", pp. 1907-1925, Aug. 2007 L. Chedot, G. Friedrich, J. M. Biedinger, P. Macret Integrated starter generator: need for an optimal design and control approach for applications to a permanent magnet machine. IEEE transactions on industrial applications
2006	E. Kuhn, C. Forgez, P. Lagonotte, G. Friedrich Modelling Ni-mH battery using Cauer and Foster structures. Journal of Power Sources 158, pp.1490–1497., 2006 S. Vivier, A. Ait-Hammouda, M. Hecquet, B. Napame, P. Brochet, A. Randria Vibro-acoustic optimization of a synchronous permanent magnet machine using the Experimental Design Method. SPRINGER Monograph, "Recent Developments of Electrical Drives", ISBN-10 : 1-4020-4535-4, pp.101-114, 2006
2005	S. Vivier, A. Ait-Hammouda, M. Hecquet, F. Gillon, P. Brochet Vibro-acoustic optimization of a synchronous permanent magnet machine using the Experimental Design Method. SPRINGER Monograph, Recent Developments of Electrical Drives, chapter 1: Theory and Advanced Computational Methods in Electrical Drives. M. El Bagdouri, B. Cébron, M. Sechilariu and J. Burger Variational Formalism Applied to the Control of Autonomous Switching Systems. Control &Cybernetics, vol. 33, N°4, 2005, p. 535- 549. S. Vivier, M. Hecquet, A. Aït-Hammouda, P. Brochet Experimental design method applied to a multiphysical model:"Trellis" designs for a multidimensional screening study. COMPEL Vol. 24, n°3, 2005, pp. 726-739.
2004	E. Kuhn, C. Forgez, G. Friedrich Modeling diffusive phenomena using non integer derivatives - Application NiMH batteries. The European Physical Journal Applied Physics, Vol. 25, No. 3, March 2004, p. 183.
2003	A. Konieczka, J.-P. Vilain, C. Plasse Optimal control of an Integrated Starter Alternator using an induction machine. Taken speed acyclisms into account. Electrical Engineering.
2002	A. Hubert, G. Friedrich Influence of the power converter on induction motor acoustic noise. Interaction between the control strategy and the mechanical structure. IEEE Proceedings Electric power Applications.
2000	C. Forgez, B. Lemaire-Semail, J.P. Hautier Formalism to design a neural network: Application to an induction machine drive coupled to a non linear mechanical load. The European Physical Journal AP, 12, Novembre 2000, p133. M. Arib, J.L. Ille. Magnetostriction effects modeling. Mechanics of electromagnetic materials and structures, J.Y. Yang and G.A. Maugin (Eds IOS Press 2000).
1999	J-M Biedinger - J-PVilain Design of low-voltage variable-frequency electrical motors. II. Optimization. European Physical Journal Applied Physics - volume 7 - n°3 - septembre 1999.
1998	M. Kant Neural approach of electromagnetic waves at a plane surface. Journal of Applied Physics, n¡ 5, 1998. G. Friedrich - M. Kant Choice of drives for electric vehicles: a comparison between two permanent magnet AC machine. IEE Electric Power Application, pp 247-252, mai 1998. J-M Biedinger - J-P Vilain Design of low-voltage variable-frequency electrical motors. I. Analysis of the magnetic-thermal-electric coupled problem. European Physical Journal Applied Physics, 3, pp 101-118, 1998.
1997	K. Kim - R. Ortega - A.Charara - J.P. Vilain Theoretical and experimental comparison of two nonlinearcontrollers for current-fed induction motors. IEEE Transactions on Control Systems Technology, pp 338-348, mai1997. J-M Biedinger - D. Lemoine Shape Sensitivity Analysis of Magnetic Forces. IEEE Transactions on Magnetics, Vol 33, No 3, pp 2309-2316, Mai1997. M. Arib, J.L. Ille Toward an Energetic Model of Ferromagnetic Hysteresis. International Journal of Applied Electromagnetics and Mechanics 8,273-284, 1997. M. Arib, J.L. Ille Magnetoelastic couplings in ferromagnetic solids. International Journal of Applied Electromagnetics and Mechanics 8, pp329-341, 1997. L. Loron Tuning of PID controllers by the non-symmetrical optimum method. Automatica, Vol. 33, n¡1, pp. 103-107, Janvier 1997. D. Taoutaou, R. Puerto, R. Ortega, L. Loron A new field-oriented discrete-time controller for current-fedinduction motors. Control Eng. Practice, Vol. 5, n¡ 2, pp. 209-217, Février1997. G. Escobar - R. Ortega -H. Sira-Ramirez - J-P Vilain - I Zein An experimental comparison of seven non linearcontrollers for power converters. Proceedings of the IEEE Industrial Electronics, pp 5589-5594,1997.