Numerical Study of Convective Heat Transfer in the End Regions of A Totally Enclosed Permanent Magnet Synchronous Machine
IEEE Energy Conversion COngress & Expo(ECCE 2016), Milwaukee, WI, USA, September 18-22, 2016

Application of the Corrected Response Surface Methodology for the Optimization of a Permanent Magnet Synchronous Machine
IEEE Optimization and Inverse Problems in Electromagnetism (OIPE 2016), Rome, Italy, September 13-15, 2016

Comparison Between Single-Model and Multi-Model Optimization Methods for Multiphysical Design
2016 XXII International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, September 04-07, 2016

Influence of the Manufacturing Process of a Claw-Pole Alternator on its Stator Shape and Acoustic Noise
2016 XXII International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, September 04-07, 2016

Optimization of synchronous reluctance machines for high power factor
2016 XXII International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, September 04-07, 2016

Estimation of Windage Losses inside Very Narrow Air Gaps of High Speed Electrical Machines without an Internal Ventilation Using CFD Methods
2016 XXII International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, September 04-07, 2016

Thermal design optimization of electric machines using a global sensitivity analysis
2016 XXII International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, September 04-07, 2016

Macroscopic Model of Magnetostriction based on Energy Minimization
Mechatronics (REM 2016), Compiègne, France, June 15-17, 2016

An adavnced simulation tool for considering the electric machines thermal performance in meachatronic systems
Mechatronics (REM 2016), Compiègne, France, June 15-17, 2016

A Thermal Study on Small Synchronous Reluctance Machine in Automotive Cycle
2016 IEEE 16th International Symposium on Industrial Electronics(ISIE 2016), Santa Clara, CA, United States, June 08-10, 2016

Six-Phase Axial Flux Permanent Magnet Generator Model : Simulation and Experimental Validation
2016 IEEE 16th International Symposium on Industrial Electronics(ISIE 2016), Santa Clara, CA, United States, June 08-10, 2016

Dealing with redundancy of a multiple mobile coil magnetic manipulator: a 3RPR magnetic parallel kinematics manipulator
15th Advances in Robot Kinematics (ARK 2016), Grasse, France, June 27-30, 2016

Next Technology on Force Sensing: Multi-axis Resonant Sensors
SPIE Conference on Sensors for Next-Generation Robotics III, Baltimore, Maryland, USA , April 17-21, 2016

Control of a cascaded doubly fed induction generator supplying an isolated DC grid
 IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, Japan, November 09-12, 2015

Vibro-acoustic simulation and optimization of a claw-pole alternator
IEEE energy Conversion Congress & Exposition (ECCE 2015), Montreal, Canada, September 20-24, 2015

Numerical and Experimental Determination of External Heat Transfer Coefficient in small TENV Electric Machines
IEEE energy Conversion Congress & Exposition (ECCE 2015), Montreal, Canada, September 20-24, 2015

Numerical Approach for Thermal Analysisof Heat Transfer into a Very Narrow Air Gap of a Totally Enclosed Permanent Magnet Integrated Starter Generator
IEEE energy Conversion Congress & Exposition (ECCE 2015), Montreal, Canada, September 20-24, 2015

A hybrid electromagnetic model for acoustic optimization of claw-pole alternators
XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering(ISEF 2015), Valencia, Spain, September 10-12 , 2015

Experimental investigation of contact resistances for small TENV electrical machine
XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering(ISEF 2015), Valencia, Spain, September 10-12 , 2015

An anisotropic model for magnetostriction and magnetization computing in electric devices
XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering(ISEF 2015), Valencia, Spain, September 10-12 , 2015

Vibration and acoustic noise of industrial inductors associated to converters in railway domain : design and material impacts
XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering(ISEF 2015), Valencia, Spain, September 10-12 , 2015

Imperfect skew impact on the vibration of the traction induction motor
XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering(ISEF 2015), Valencia, Spain, September 10-12 , 2015

Impact of a non-conventional PWM strategy on the DC link film capacitor sizing
17th European Conference on Power Electronics and Applications (EPE'15, ECCE Europe), Geneva, Switzerland, 8-10 September, 2015

Analysis of DC-Link Current Harmonics for Unconventional PWM strategies - Applicaiton of the double Fourier integral Method
17th European Conference on Power Electronics and Applications (EPE'15, ECCE Europe), Geneva, Switzerland, 8-10 September, 2015

Modeling and Control of a stand alone Cascaded Doubly Fed Induction Generator supplying an isolated load
17th European Conference on Power Electronics and Applications (EPE'15, ECCE Europe), Geneva, Switzerland, 8-10 September, 2015

Sensitivity Analysis of an Electrochemical Model of Li-ion Batteries and Consequences on the Modeled Aging Mechanism
Battery Conference 2015 AACHEN

Sensitivity Analysis of an Electrochemical Model of Li-ion Batteries and Consequences on the Modeled Aging Mechanism
227th ECS Meeting, Chicago, Illinois, USA, May 24-28, 2015

LiFePO4/graphite Battery Modelling for an Aeronautical Application
2015 IEEE 24th International Symposium on Industrial Electronics (ISIE'15), Buzios, Rio de Janeiro, Brazil, 03-05 June, 2015

Development and Characterization of a Dynamic Smart Structure Providing Multi-axis Force Sensing for Robotic Applications
IEEE International Conference on Robotics and Automation (ICRA'15), Seatle, Washington, USA, May 26-30, 2015

A new methodology for identifying external convection coefficients in electric machines
IEMDC 2015, Coeur d'Alène, Idaho, USA, May 10-13, 2015

New voltage sensorless approach for maximum constant power tracking of WECS based on a cascaded DFIG
IECON 2014 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 30- November 01, 2014

Impact of the Flied Weakening on the Iron Losses in the Stator of an Internal Permanent Magnet Synchronous Machine
ECCE 2014, Pittsburgh, PA, USA, September 14-18, 2014

Noise Radiated by a Permanent Magnet Synchronous Motor : Simulation Methodology and Influence of Motor Defects
ICEM 2014, Berlin, Germany, 02-05 September 2014

Innovative Permanent-Magnet Starter Motors for Automotive Micro-Hybrid Applications
ICEM 2014, Berlin, Germany, 02-05 September 2014

Thermal Model of Stator Slot for Small Synchronous Reluctance Machine
ICEM 2014, Berlin, Germany, 02-05 September 2014

Influence of temperature on the vibro-acoustic behavior of claw-pole alternators
ICEM 2014, Berlin, Germany, 02-05 September 2014

Multi-axis force sensing with pre-stressed resonant composite plates : An alternative to strain gauge force sensor
IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM'2014), Besançon, France, 08-11 July, 2014

A macroscopic local magnetostriction model taking into account the anisotropy and stress effect
CEFC 2014, The Sixteenth Biennal IEEE Conference on Electromagnetic Field Computation, Annecy, France, May 25-28, 2014

Advanced Electric Model of Aluminium Electrolytic Capacitor with Diffusive Element
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

Power capability study of a Cascaded Doubly Fed Induction Machine
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

Thermal modeling of an Asymetrical Totally Enclosed Permanent Magnet Integrated Starter Generator
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

Fast Iron Losses Model Taking Into Account the Control Laws for the Optimal Sizing of IPMSM
ELECTRIMACS 2014, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems, Valencia, Spain, May 19-22, 2014

New approach for maximum power tracking of a variable speed WT at constant power generation, under normal grid conditions
MELECON 2014, 17th IEEE Mediterranean Electrotechnical Conference, Beirut, Lebanon, April 13-16, 2014

Design and Magnetic Noise Reduction of the Surface Permanent Magnet Synchronous Machine
EVER Monaco 2014, International Conference on Ecological Vehicles & Renewable Energie, Monte-Carlo, March 27, 2014

Thermal Modeling and Experimental Validation of a Large Prismatic Li-ion Battery
IECON 2013, 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, 10-14 November 2013

Simcal Project: Calendar Aging Results Obtained On a Panel of 6 Commercial Li-Ion Cells
224th ECS Meeting in San Francisco, California, October 27-November 1 2013

On-Line Adaptive Tuning of a Lithium-Ion Battery Cell State of Charge Observer
ECCE 2013, IEEE Energy Conversion Congress & Exposition, Denver, CO, USA, September 15-19, 2013

Determination of rotor-stator heat exchange coeffcients in the case of totally enclosed machines : Application to an integrated starter-generator
ECCE 2013, IEEE Energy Conversion Congress & Exposition, Denver, CO, USA, September 15-19, 2013

Normal Permeability of Grain Non-Oriented, Grain Oriented and Amorphous Electrical Steel Sheets
ISEF 2013, XVI International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Ohrid, Macedonia, September 12-14, 2013

Study of Electromagnetic Forces Computation Methods for Machine Vibration Estimation
ISEF 2013, XVI International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Ohrid, Macedonia, September 12-14, 2013

Interaction Between Numerical Analysis and Analytical Approach in Order to Reduce the Magnetic Noise Produced by a Permanent Magnet Motor
ISEF 2013, XVI International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Ohrid, Macedonia, September 12-14, 2013

Simple Lumped Parameter Thermal Model with Practical Experimental Fitting Method for Synchronous Reluctance Machine
EPE13'ECCE Europe, 15th European Conference on Power Electronics, Lille, France, 3-5 September 2013

Lithium-Iion state of charge observer with open circuit voltage hysteresis model
EPE13'ECCE Europe, 15th European Conference on Power Electronics, Lille, France, 3-5 September 2013

A Methodology for Studying Aluminium Electrolytic Capacitors Wear-out in Automotive Cases
EPE13'ECCE Europe, 15th European Conference on Power Electronics, Lille, France, 3-5 September 2013

Harmonic pressure optimization on numerical electric motor model
COMPUMAG 2013, Budapest, Hungary, 30June-4 July 2013

Optimization methods coupled to finite element analysis to design electric machines for automotive applications
Modelling Novel EM Devices seminar, UK Magnetics Society, 22nd May 2013

In vitro characterization of the technique of portal vein embolization by injection of a surgical glue
65th Annual Meeting of the APS Division of Fluid Dynamics, Volume 57, Number 17, San Diego, California, November 18-20, 2012.

Toward an optimal Heisenberg’s closed-loop gate drive for Power MOSFETs
38th Annual Conference on IEEE Industrial Electronics Society (IECON2012), Montréal, Canada, October 25-28, 2012.

Active Reduction of Electrical Machines Magnetic Noise by the Control of Low Frequency Current Harmonics.
38th Annual Conference on IEEE Industrial Electronics Society (IECON2012), Montréal, Canada, October 25-28, 2012.

Rotor and Stator Shape Optimization of a Synchronous Machine to Reduce Iron Losses and Acoustic Noise.
The 8th IEEE Véhicle Power and Propulsion Conference (VPPC2012), Seoul, Korea, October 9-12, 2012.

Application of Output Space Mapping Method for Fast Optimization Using Multi-Physical Modeling
IEEE Energy Conversion Congress & Exposition (ECCE2012), Raleigh, USA, September 15-20, 2012.

Analytical Model taking into account the Cross Saturation for the Optimal Sizing of IPMSM
XXth International Conference on Electrical Machines (ICEM2012), Marseille, France, September 2-5, 2012.

Thermal Modelling of a Claw-Pole Car Alternator : Steady-State Computation and Identification of free Convection coefficients.
XXth International Conference on Electrical Machines (ICEM2012), Marseille, France, September 2-5, 2012.

Numerical Simulations of Rotor Dynamic Eccentricity Effects on Synchronous Machine Vibrations for Full Run Up.
XXth International Conference on Electrical Machines (ICEM2012), Marseille, France, September 2-5, 2012.

A Simple Experimental Prediction Model of Photovoltaic Power for DC Microgrid
21st IEEE International Symposium on Industrial Electronics (ISIE2012), Hangzhou, China, May 28-31, 2012.

Wavelet-based Non-stationary Acoustical Holography
Surveillance 6, Compiègne, France, october 2011

Fast optimization of an IPMSM with Space Mapping Technique
ECCE 2011, Phoenix (Arizona - USA), 17-22 septembre 2011
Digital Object Identifier : 10.1109/ECCE.2011.6064268

PWM Strategy dedicated to the reduction of DC bus capacitor stress in embedded three phase inverter
IEEE VPPC 2011, Chicago (Illinois, USA), 6-9 septembre 2011
Digital Object Identifier : 10.1109/VPPC.2011.6043068

Lead-acid battery model for hybrid energy storage
IEEE VPPC 2011, Chicago (Illinois, USA), 6-9 septembre 2011
Digital Object Identifier : 10.1109/VPPC.2011.6043091

Study of graphite/NCA Li-ion Cell Degradation During Accelerated Aging Tests - Data Analysis of the SimStock Project.
IEEE VPPC 2011, Chicago (Illinois, USA), 6-9 septembre 2011

Position Control of Faulted Six-Phase Induction Machineusing Genetic Algorithms
Sdemped 2011, Bologna, Italy, September 2011

A PWM strategy dedicated to RMS current reduction in DC link capacitor of an embedded three phase inverter
14th European Conference on Power Electronics and Applications (EPE 2011), Birmingham (UK), 30 août - 1er septembre 2011

Optimal Design of Inductors - Transformers Associated to Converters for Railway Application.
COMPUMAG 2011, Sidney (Australia), 12-15 July 2011

Coupled Numerical Simulation Between Electromagnetic and Structural Models. Influence of the supply harmonics on the vibrations for a WRSM.
COMPUMAG 2011, Sidney (Australia), 12-15 July 2011

Sensorless position control of six-phase induction machine using fuzzy-PI system
ISIE 2011 (IEEE International Symposium on Industrial Electronics), pp. 739-744, Gdansk, Poland, june 2011

Design of inductors - transformers associated to the converters for railway application.
ELECTRIMACS2011, Cergy-Pontoise, France, 6-8 Juin 2011

Semi-analytical Simulation of an Embedded PWM Inverter Dedicated to Automotive Applications
ELECTRIMACS2011, Cergy-Pontoise, France, 6-8 Juin 2011

Vibratory simulation tool for an electromagnetically excited non skewed electrical motor, case of the Wound Rotor Synchronous Machine.
ELECTRIMACS2011, Cergy-Pontoise, France, 6-8 Juin 2011

Position Control of Six-Phase Induction Machine using Fuzzy PI Controller Tuned by Genetic Algorithms.
Power ENG2011, Torremolinos, Spain, May 2011

Multiphysic Design Rules Applied To Inductors Or Transformers For Railway Application
IEMDC2011, Niagara Falls, USA, May 2011

Analysis on DC link filtering capacitor stress of an inverter for embedded systems.
Automotive Power Electronics, Montigny Le Bretonneux, France, 6-7 April 2011

Evaluation of a Planar Coil Model using Shell Elements
Progress In Electromagnetics Research Symposium 2011, Marrakesh, Morocco, 20-23 March 2011

Thermal modeling of industrial inductor and transformers associated to the converters
ICEM 2010, Rome, Italy, september 2010

Multi-physics modeling of industrial inductors associated to converters
VPPC 2010, Lille, France, september 2010

Influence of the load angle on the magnetic pressure harmonic content of a WRSM
IECON 2010 : The 36th Anuual Conference of the IEEE Industrial Electronics Society, Glendale, AZ, USA, 07-10 November 2010

Behavior analysis of a brush machine by space vector theory
ICEM 2010 (International Conference on Electrical Machines), Rome, Italy, 6-8 septembre 2010

Improvements for multi objective optimizations using output space mapping technique
OIPE 2010 (Optimization and Inverse Problems in Electromagnetism), Sofia, Bulgarie, 14-18 septembre 2010

Experimental and numerical evaluation of iron losses in a claw pole car generator
IEEE ICEM 2010 (International Conference on Electrical Machines), Rome, Italy, 6-8 Septembre 2010.

Fast optimization of a linear actuator by space mapping using unique finite element model
ECCE 2010, IEEE Energy Conversion Congress and Exposition, Atlanta, Georgia, Paper #734

Experimental comparison between Wound Rotor and Permanent Magnet Synchronous machine for Integrated Starter Generator applications
ECCE 2010, IEEE Energy Conversion Congress and Exposition, Atlanta, Georgia, Paper #57

Identification of Photovoltaic Array Model Parameters. Modelling and Experimental Verification.
International Conference on Renewable Energies and Power Quality (ICREPQ’10), Granada (Spain), 23th to 25th March, 2010.

Ageing study of a supercapacitor-battery storage system
ICEM 2010 (International Conference on Electrical Machines), Rome, Italy, 6-8 septembre 2010

Design of a Supercapacitor-Battery Storage System for a Waste Collection Vehicle
IEEE VPPC2010, Lille, Septembre 2010

EV charging system with PV grid-connected configuration
IEEE VPPC2010, Lille, Septembre 2010

Improvement of an Automotive alternator using the Experimental Design Method
IEEE IEMDC 2009 (International Electric Machines and Drives Conference), Miami, Floride, USA 3-6 mai 2009

Control Strategies and Inverter Topologies for Stabilization of DC Grids in Embedded Systems
13th European Conference on Power Electronics and Applications EPE'2009, Barcelone, Espagne, 8-10 septembre 2009

Prediction of audible magnetic noise radiated by adjustable speed drive induction machines
IEEE IEMDC 2009, Miami, 3-6 May 2009

Comparison of optimization algorithms for the design of a BLDC machine with travel time minimization
Electromotion 2009, Lille, France, 1-3 July 2009

Permeance computation for determination of induction motor acoustic noise
ISEF 2009, Arras, France, 10-12 septembre 2009

Optimal design a high dynamic actuator for diaphragm pumps
IEMDC 2009, Mimai, Floride, USA, 3-6 mai 2009

Combination of Finite Element and Analytical Models in the Optimal Multi-Domain Design of Machines: Application to an Interior Permanent Magnet Starter Generator
IAS 08, 5-9 octobre 2008, Edmonton, Canada

Multiphysics modeling : electro-vibro-acoustics and heat transfer of induction machine
ICEM 08, Vilamoura, Portugal, 6-9 September 2008

Characterization of the audible magnetic noise emitted by traction motors in railway rolling stock
Inter-noise 08 : 37th International Congress and Exposition on Noise Control Engineering, Shangai, China, 26-29 octobre 2008

Application of the VDA standard for the comparison and losses reduction of high efficiency car alternators
MELECON 2008, ©2008 IEEE, Ajaccio, France, 5-7 mai 2008

A New Predictive Current Controller Dedicated To Salient Pole Synchronous Machines
ICEM'08, XVIII International Conference on Electrical Machines, Vilamoura, Portugal, 6-9 septembre 2008

Modelling and Control of a Cascaded Doubly-Fed Induction Generator based on a Dynamical Equivalent Circuits
ELECTRIMACS'08, Québec, Canada, 8-11 juin 2008

A New Modeling of DC Machines Taking Into Account Commuitation Effects
2008 International Conference on Electrical Machines( ICEM 2008), Vilamoura, Portugal, 6-9 septembre 2008

A Coupled Magneto-thermal Model of Rotary Transformers for the Optimal Design of Claw Pole Alternators Excitation, SIA Automotive.
Power Electronics APE 07, 26-27 Septembre 2007, Paris, France.

Design of a Brushless Rotor Supply for a Wound Rotor Synchronous Machine for Integrated Starter Generator, 2007 IEEE Vehicle Power and Propulsion Conference.
VPPC07, 9-12 Septembre 2007, Arlington, Texas, USA.

"Sensorless Control of a Wound Rotor Synchronous Belt-Driven Starter-Alternator,"
EPE 2007, Aalborg, Denmark, 2-5 septembre 2007.

Inverter topology comparison for remedial solution in transistor faulty case.
EPE 2007, Aalborg, Denmark, 2-5 septembre 2007.

Sliding mode control of a doubly-fed induction generator.
EPE'2007 Conference, Aalborg, Danemark, 2-5 Sept. 2007.

Fault Tolerant Control using a Hybrid Predictive Strategy applied to a Current Controlled Four-Legged Three-Phase Converter.
IET Colloquium on Reliability in Electromagnetic Systems 2007, 24-25 Mai 2007, Clichy, France.

Comparison of Two Optimal Rotary Transformer Designs for Highly Constrained Applications.
International on Electrical Machines and Drives Conference IEMDC 07, 3-5 Mai 2007, Antalya, Turquie.

Acoustic noise of electromagnetic origin in a fractional-slot induction machine.
SSD 2007, Hammamet, Tunisie, 19-22 mars 2007.

Calcul de forces électromagnétiques dans le MAGSTREAM
NUMELEC 2007, Lille, France, Novembre 2007

Spread spectrum strategies study for induction motor vibratory and acoustic behavior.
IEEE IECON 2006, 7-10 novembre 2006, Paris - France.

Optimal control for a wound rotor synchronous starter generator.
IEEE Industrial Application Society Annual meeting; 8-12 Octobre 2006, Tampa Floride.

Temperature Supervision of an Integrated Starter Generator.
IEEE Industrial Application Society, Annual meeting, 8-12 Octobre 2006, Tampa Floride.

Vibratory and acoustic behavior of induction traction motors, machine design improvement .
IEEE Industrial Application Society Annual meeting; 8-12 Octobre 2006, Tampa Floride

A Fast Noise-Predictive Multiphysical Model of the PWM-controlled Asynchronous Machine.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Torque ripple improvement with IPMSM rotor shape modification.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Integration of an Induction Machine Synthesis in a Multiphysic Simulation Tool for Automotive Applications
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Dysfunctions of rotating magnetic density sorters induced by the distribution of the magnetic field and the dynamic behaviour of particles.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Simplified sensorless control technique for wound rotor synchronous motor.
International Conference on Electrical Machine (ICEM), 2-5 septembre 2006, Chania - Grèce.

Calculation of magnetic forces inside rotating non-magnetic particle sorters
EMF 2006 Aussois (FRANCE) – 19 au 22 juin 2006

Increasing reliability and compactess of an inverter dedicated to a starter generator application by the PWM strategy.
MIT/Industry Consortium on Advanced Automotive Electrical/Electronic Components and Systems Meeting Paris 19 ­ 20 June 2006.

Calcul de forces magnétiques dans le magstream
NUMELEC'06, Lille, les 29-30 novembre et 1er décembre 2006

Design of a Predictive Current Controller for a Starter Generator Application
Conférence EPE2005 (European Power Electronics) September 2005 Dresden – Germany

Desing comparison of two rotating electrical machines for 42V electric power steering.
IEEE IEMDC 15-18 mai 2005 San Antonio TEXAS (USA).

Integrated Starter Generator: Need of an optimal desing and control approach. Application to a permanent magnet machine.
IEEE IEMDC 15-18 mai 2005 San Antonio TEXAS (USA).

Comparison between two Ni-mH battery Models.
Electrical Vehicle Symposium EVS 21, Monaco, Avril 2005.

Model based Battery Mananagement System for Ni-MH batteries Influence of the model and of the mode of implementation.
2éme séminaire franco-chinois sur les batteries avancées; Bordeaux 7-8 avril 2005.

Optimal control of an integrated induction starter generator.
IEEE-Vehicle Power and Propulsion, Paris Octobre 2004

Application of a 42V NiMH battery model to design a control law for a mild hybrid vehicule.
IEEE-Vehicle Power and Propulsion, Paris Octobre 2004.

A cross saturation model for interior permanent magnet synchronous machine. Application to a starter generator
IEEE - Industry Application Society annual meeting (IAS), Seattle, Etats-Unis, Octobre 2004

A Comparison between Pulse Width Modulation Strategies in terms of Power Losses in a Three-Phased Inverter - Application to a Starter Generator
Congrès European Power Electronics – Power Electronics and Motion Control 2004, Riga , Lettonie. Septembre 2004

L. Chédot, G. Friedrich

A dynamic model for interior permanent magnet synchronous machine. Application to a starter-generator
International Conference on Electrical Machine (ICEM), Cracovie, Pologne, Septembre 2004.

"Vibro-acoustic optimization of a synchronous permanent magnet machine using the Experimental Design Method"
International Conference on Electrical Machine (ICEM), Cracovie, Pologne, Septembre 2004.

"Experimental Design Method applied to a multi-physical model: ‘Trellis’ designs for a multi-dimensional screening study"
OIPE 2004 Grenoble (POLOGNE) – 6 au 8 septembre 2004

Fractional and diffusive representation of a 42V NIMH Battery.
Congrés IFAC, Bordeaux juillet 2004 .
Sélectionné et paru dans le livre ‘Fractional differentiation and its applications’ Ubooks, ISBN 3-86608-026-3

Offline Optimized Pulse Pattern with a view to Reducing DC-Link Capacitor - Application to a Starter Generator
IEEE – Power Electronics Specialists Conference 2004, Aachen, Allemagne. Juin 2004

To an optimal control of an Integrated Starter Alternator using an induction machine.
2004 IEEE International Symposium on Industrial Electronics, Palais des Congrès Expositions, Ajaccio, France, May 4-7, 2004

Comparison of a natural sampling and random PWM control strategy for reducing acoustic annoyances.
European Power Electronics and drive conference (EPE 03), Toulouse, France, Septembre 2003.

Optimal control of interior permanent magnet synchronous integrated starter generator.
European Power Electronics and drive conference (EPE 03), Toulouse, France, Septembre 2003.

Improvement of AECV motorization with double rotor electrical motors.
5th International AECV Conference 2003, Angers, France, 2-5 juin 2003.

Comparison of direct and adaptative optimal controls for interior permanent magnet synchronous integrated starter generator.
IEEE International Electrical Machine and Drive Conference (IEMDC 03), Madison, Wisconsin, Etats-Unis, Juin 2003.

Emmanuel Kuhn, Christophe Forgez, Guy Friedrich.

Electric Equivalent Circuit of a Ni MH cell. Methods and results.
Electric Vehicle Symposium (EVS 2003) Los Angeles.

Vibrations and acoustic noise reduction in A.C. electrical drives. Use of analytical and experimental modal techniques.
ISMA - International Conference on Noise & Vibration Engineering - septembre 2002 - Louvain, Belgique.

Comparison of two optimal machine designs for integrated starter-generator applications.
ICEM 2002 (août) - Bruges, Belgique.

Optimization of the control of an Integrated Starter Alternator using an induction machine - Mechanical sensor role.
ICEM 2002 (août) - Bruges, Belgique.

Modélisation d'accumulateurs NI-mh en vue d'une application pour véhicule hydride électrique.
GEVIQ' 2002 (juin) - Marseille, France.

A developpment of an analytical model to compute the pulsating torques of an induction motor supplied by power converter.
Surveillance 4; 4-6 septembre 2001, Compiègne, France.

A method for choosing the power converter control strategy to reduce the acoustic noise by taking into account the mechanical structure response.
EPE 2001 - 27, 29 Août 2001 - Graz, Autriche.

'An extended Kalman filter and an appropriate model for the real time estimation of the induction motor variables and parameters', IASTED International Conference on Measurement and Control MECO 2001, 16-18 Mai 2001, Pittsburg, USA.

"Method to find the hybridization rate for a parallel hybrid electrical vehicle.
Congrés EVS-17, Montréal Octobre 2000.

Modelling of a wound rotor salient pole synchronous machine and its converter in the constant power zone.
Congrés EVS-17, Montréal Octobre 2000.

Modelisation of rotating magnetic fields in polyphase alternative machines supplied by power converters : use of harmonic techniques and matrix computation.
Vibrations and acoustic noise of electric machinery - Lodz (Juin 2000).

Analysis of the noise, vibration and transmission characterics of induction motors.
Inter noise 2000 (Nice, France).

"Fault detection of an induction motor bu state estimation, comparison of two approaches: set-membershit filtering and Kalman filtering".
Conférence Européenne de Contrôle (ECC'99).

Magnetostriction effects modelling.
1999 ASME - Mechanics & materials conference.
June 27-30, 1999 - Blacksburg, Virginia, USA.

"Estimation paramétrique de la machine asynchrone. Etude comparative de deux algorithmes".
3ème Conférence Internationale sur l'Automatisation Industrielle de Montreal, 7-9 Juin 1999.

"An appropriate model for the real-time identification of the induction motor by an extended Kalman filter".
Conférence Européenne de Contrôle (ECC'99).

"Comparative study of two AC brushless machines in automotive applications: the induction machine and the wound rotor synchronous machine".
EVS 15; BRUXELLES; 1-3 octobre 1998

"Acoustic noise generated by the association of an induction machine and a natural sampling power converter".
International seminar on vibations and acoustic noise of electric machinery; Béthune 25-26 mai 1998.

"An experimental comparison of seven non linear controllers for power converters".
Proceedings of the 36th IEEE Conference, Decision and control,Vol 1, pp 227-228, 1997.

"Theoretical and Experimental Comparison of two nonlinear controllers for current-fed induction motors".
European Control Conference. Bruxelles 1-4 juillet 1997.

"Comparative and experimental study between a synchronous poles and wound rotor and a permanent magnet machine in automotive applications".
ISATA 96, Florence, pp 151-157, Juin 1996.

"Criteria for the evaluation of three-phase PWM strategies in the case of vectorial approach".
PEMC'96, Budapest, Vol 2, pp 579-583, 1996.

"Experimental noise characterization for induction motoridentification".
ELECTRIMACS 96, St Nazaire, 17-19 Septembre 96, Vol. 2, pp787-792.

"Recursive least-squares implementation for induction motorparameter estimation".
ELECTRIMACS 96, St Nazaire, 17-19 Septembre 96, Vol. 3, pp953-958.

"Contribution for choosing a model for the induction machine in electrical automotive applications".
IMACS 96, SAINT NAZAIRE ; pp181-186, Septembre 1996.

"Pratical application of passivity based on control forInduction Motors".
CESA'96 IMACS Multiconference, LILLE, 9-12 Juillet 1996.